- News class
- Contact us
-
Person：Mr. Steve
Tel：+86-0752-6158688
Fax：+86-0752-6158689
E-mail：zhouxing@jiamingmetal.com
Address：Guangdong dongguan Dan row town industrial park
-
How to prolong the service life of the electrolytic pickling rack?
Release time：2016/7/11 16:58:29 | Source of information：Huizhou jia will electroplating technology co., LTDTo extend the service life of the rack, the only way is to insulate jig in solution not in contact with the workpiece location, set aside and workpiece contact site. Insulation method can be applied to insulation rubber, plastic pipe or wrapped with plastic tape, so that the consumption of metal materials can be saved, and the reactive power consumption can be saved.
In order to save the loss of iron and steel materials can also be changed to the rack above the level of the liquid material of copper, and according to the following method connection. This can save material loss and improve the hanger conductive performance.
Production method: hook with the main rod first car thread, take ordinary nut two welded together (with a nut screw teeth too little, precession after poor fastness) and nut is arranged at the upper end of the rotary hook, the lower end of the rotary entered the bar, tightened if improper angle can be in the nut pad iron, or threaded parts slightly file short, replacement of the main rod in the jaw can be operated. The hanger is also applicable to other types of plating, such as for the upper end of the aluminum or copper, and the lower end is made of titanium or aluminum anode aluminum oxide composite type hanger.
In the previous：How to do the work of insulation electroplating?
