What are the common methods of plating accident treatment?

Electroplating is a high pollution, high damage to the industry, on the daily workers often have some accidents, if handled?
1) mechanical injuries: cuts, abrasions, contusions, with distilled water to wash the wound with iodine, minor injuries, serious need treatment.

2) the thermal damage: burns, burns, do not use cold water washing, don't break the blisters, in the wound coated Wanhua oil, essential balm, etc., if the wound skin has been broken, available 1% potassium permanganate solution coating and timely medical treatment.

3) shock: quickly cut off the power, when necessary, to carry out artificial respiration.

4) skin damage: acid burns, rinse with plenty of water, and then rinse with saturated NaHCO3 solution or dilute ammonia water. Alkali burns, wash with plenty of water, then rinse with 2% acetic acid solution or saturated boric acid solution, and then rinse with water. Chromate splashed on the skin, immediately with 5% sodium thiosulfate solution, distilled water mixture cleaning or 25% hydrochloric acid, 20% ethanol and 55%.

5) respiratory tract inhalation irritation or toxic gases: inhalation of chlorine, hydrogen chloride gas, you can inhale a small amount of ethanol and ether mixture of steam detoxification. Inhale hydrogen sulfide or carbon monoxide gas, should immediately breathe fresh air. Drinking dilute acetic acid solution with alkali steam poisoning

6) poison into the mouth: General poison into the mouth, can be used 5~10mL dilute sulfuric acid solution to add a cup of water, after oral administration with foreign body to stimulate the throat, and immediately sent to the hospital. Heavy metal salt into the mouth, should be urged to spit after drinking milk or Su water. Nitrate into the mouth, should be urged to drink after the spit of concentrated salt water, milk. Cyanide poisoning, with a handkerchief or cotton wool in a minute inhalation 5 drops of amyl alkenyl ester, taken within 0.2% potassium permanganate solution or 5% sodium thiosulfate solution gastric lavage.

7) eye injury: acid splashed into the eyes should be rinse immediately with plenty of water for a long time, and with the mass fraction of 0.02 borax solution eye wash, then wash with water. Alkali splashed into eyes, rinse immediately with plenty of water, and then use the mass fraction of 0.03 boric acid solution wash, wash in water. Chromic acid splashed into the eyes of 1%, sodium thiosulfate solution cleaning.