-
当前位置 > 首页 > 新闻资讯
-
Vacuum plating process or use the product when the color of the how to do it? [2016-7-11] Metallic or non-metallic appearance after the appearance of the metal if taken to the coloring, dyeing or other surface finishing treatment, usually have to take protective measures. To ensure that the appearance of fine decora...[详情]To talk about the impact of electroplating equipment on the quality of plastic chrome plating layer? [2016-7-11] Chromium plating is one of the main production units in plastic electroplating. The density and uniformity of the coating affect the quality of the products. Equipment, plating solution and process technology are the key links ...[详情]To talk about the impact of electroplating equipment on the quality of plastic chrome plating layer? [2016-7-11] Chromium plating is one of the main production units in plastic electroplating. The density and uniformity of the coating affect the quality of the products. Equipment, plating solution and process technology are the key links ...[详情]What are the common methods of plating accident treatment? [2016-7-11] Electroplating is a high pollution, high damage to the industry, on the daily workers often have some accidents, if handled? 1) mechanical injuries: cuts, abrasions, contusions, with distilled water to wash the wound with iodi...[详情]How to do the work of insulation electroplating? [2016-7-11] In the process of insulation hanger regardless of the paint or insulation method, key points need to pay attention to the following points: (1) the insulation must be washed off in advance. If the rack...[详情]How to prolong the service life of the electrolytic pickling rack? [2016-7-11] To extend the service life of the rack, the only way is to insulate jig in solution not in contact with the workpiece location, set aside and workpiece contact site. Insulation method can be applied to insulation rubber, plasti...[详情]Plating process, how to choose hang - up, plating, continuous plating and brush plating? [2016-7-11] Electroplating is use the principle of electrolysis in some metal surface plating on a thin layer of metal or alloy, using electrolysis to the surface of metal or other material parts attached to a layer of metal film process s...[详情]Analysis of unqualified nickel plating layer available plating method? [2016-7-11] As said in the vacuum plating or traditional hardware electroplating waste water processing in nickel plating production process. When the nickel layer thickness is not enough, or have no local plating nickel defects when, usable ...[详情]What are the disadvantages of plating workpiece hanging too dense? [2016-7-11] Workpiece hung too close between will be covered and partial areas of the workpiece will thus may not plate normal coating, or only plating coating on an extremely thin, the situation of chrome plating difficulty bigger, the pl...[详情]The appearance quality control requirements of electroplating injection molding parts [2016-7-11] Surface quality and inspection requirements for injection molding process Raw materials must be fully dried according to the requirements of the process, can not have water, otherwise the surface will be injected after the inj...[详情]
